During use, many users encounter error E20 Electrolux washing machine when operating. Is error E20 serious? How to fix this error? Let's refer to the article about E20 error of Electrolux washing machine of Danh Dat Refrigeration to better understand.

Error E20 Electrolux washing machine is what error? Error e20 in Electrolux washing machine warns users that the machine is having a difficult drainage problem, the pump cannot push the water out or is clogged. Error e20 Electrolux washing machine makes the washing machine unable to pump water out, There is still water left in the drum. Therefore, the machine cannot work, the waiting time for the water pump is long, and the error screen E20.

=> See more: https://dienanhdanhdat.vn/dich-vu-sua-may-giat/ The simplest sign of error identification E20 Electrolux washing machine for front-load Electrolux washing machines is the display of error code E20. In addition, the Electrolux washing machine also has a number of other manifestations such as: The machine is stationary, does not work, does not discharge water. The machine does not spin when it comes to the spin cycle and there is no buzzing sound. Long wait time for water pump. There is still water in the drum. Beep beep sound on LED display.

Washing machine error e20 is usually caused by the following reasons: Too much dirt in the drum, these deposits stick to the drain pipe of the machine and cause the water in the cage to not drain out in the rinse and spin program. . Because the pump pit is dirty, there is something stuck in the pump hole, leading to the impeller jam. Due to the drain pump part of the washing machine being rolled, flickering, sometimes running or not. Due to damaged drain pump unit, coil fire. Due to a fault in the control circuit, the circuit does not give commands (supply power) to the pump.

=> See more: https://dienanhdanhdat.vn/loi-e10-may-giat-electrolux/

How to handle error E20 on Electrolux washing machine. Check the drain pipe: Make sure that the sewage pipe is in place so that it does not cause a water blockage. The height of the drain pipe is not more than 100 cm, not less than 60 cm above the base of the machine. If there is too much sediment in the pipe, it will easily clog the water line. Therefore, you need to clean the drain pipe regularly. At the same time, you should consider whether the pipe is twisted or bent, if so, put it back straight, making it easier for water to flow through.

Check the buzzing sound: The buzzing sound is quite familiar, in the squeeze cycle the drain pump works and emits a buzzing sound. Accompanied by the condition that the Electrolux washing machine is washing, it stops. If your washing machine is in the rinse/spin program without this sound, check the pump.

=> See more: https://dienanhdanhdat.vn/

Check the condition of the water in the drum: The pump does not work at the rinse and spin cycle, which will prevent the water in the tub from being able to escape to the outside. If you find that the water in the drum is still intact, think of this as a pump failure. And needs to be replaced.

Check the drain pump system and the circuit board: The drain pump system is used to draw water inside the drum and discharge it through the drain pipe. If the discharge pump is wrapped around the coil, the water is not fully pumped out. The circuit board and pump are badly damaged, if the coil dies, the water does not escape. Checking the drain pump system and the board requires expert washing machine technician. To ensure your safety, seek the help of a professional Electrolux washing machine repair technician.